initial commit of the backuppc config.

admin01.pl

@@ -0,0 +1,23 @@
+#
+# Local server backup of /etc as user backuppc
+#
+$Conf{XferMethod} = 'rsync';
+
+#$Conf{TarShareName} = ['/etc'];
+$Conf{RsyncShareName} = [
+  '/root',
+  '/etc',
+  '/home',
+  '/var/lib'
+];
+
+$Conf{TarClientCmd} = '/usr/bin/env LC_ALL=C $tarPath -c -v -f - -C $shareName --totals';
+
+# remove extra shell escapes ($fileList+ etc.) that are
+# needed for remote backups but may break local ones
+$Conf{TarFullArgs} = '$fileList';
+$Conf{TarIncrArgs} = '--newer=$incrDate $fileList';
+$Conf{host} = 'auth01.int.itguru.at';
+$Conf{ClientNameAlias} = '192.168.122.250';
+
+$Conf{RsyncClientCmd} = '$sshPath -l backuppc $host nice -n 19 sudo $rsyncPath $argList+';

auth01.pl

@@ -0,0 +1,22 @@
+#
+# Local server backup of /etc as user backuppc
+#
+$Conf{XferMethod} = 'rsync';
+
+#$Conf{TarShareName} = ['/etc'];
+$Conf{RsyncShareName} = [
+  '/root',
+  '/etc',
+  '/home',
+  '/var/lib'
+];
+
+$Conf{TarClientCmd} = '/usr/bin/env LC_ALL=C $tarPath -c -v -f - -C $shareName --totals';
+
+# remove extra shell escapes ($fileList+ etc.) that are
+# needed for remote backups but may break local ones
+$Conf{TarFullArgs} = '$fileList';
+$Conf{TarIncrArgs} = '--newer=$incrDate $fileList';
+$Conf{host} = 'admin01.int.itguru.at';
+$Conf{ClientNameAlias} = '192.168.122.30';
+

config.pl

@@ -0,0 +1,2280 @@
+#============================================================= -*-perl-*-
+#
+# Configuration file for BackupPC.
+#
+# DESCRIPTION
+#
+#   This is the main configuration file for BackupPC.
+#
+#   This file must be valid perl source, so make sure the punctuation,
+#   quotes, and other syntax are valid.
+#
+#   This file is read by BackupPC at startup, when a HUP (-1) signal
+#   is sent to BackupPC and also at each wakeup time whenever the
+#   modification time of this file changes.
+#
+#   The configuration parameters are divided into four general groups.
+#   The first group (general server configuration) provides general
+#   configuration for BackupPC.  The next two groups describe what
+#   to backup, when to do it, and how long to keep it.  The fourth
+#   group are settings for the CGI http interface.
+#
+#   Configuration settings can also be specified on a per-PC basis.
+#   Simply put the relevant settings in a config.pl file in the
+#   PC's backup directory (ie: in __TOPDIR__/pc/hostName).
+#   All configuration settings in the second, third and fourth
+#   groups can be overridden by the per-PC config.pl file.
+#
+# AUTHOR
+#   Craig Barratt  <cbarratt@users.sourceforge.net>
+#
+# COPYRIGHT
+#   Copyright (C) 2001-2009  Craig Barratt
+#
+#   See http://backuppc.sourceforge.net.
+#
+#========================================================================
+
+###########################################################################
+# General server configuration
+###########################################################################
+#
+# Host name on which the BackupPC server is running.
+#
+$ENV{'PATH'} = '/bin:/usr/bin';
+delete @ENV{'IFS', 'CDPATH', 'ENV', 'BASH_ENV'};
+$Conf{ServerHost} = 'storageblock';
+chomp($Conf{ServerHost});
+
+#
+# TCP port number on which the BackupPC server listens for and accepts
+# connections.  Normally this should be disabled (set to -1).  The TCP
+# port is only needed if apache runs on a different machine from BackupPC.
+# In that case, set this to any spare port number over 1024 (eg: 2359).
+# If you enable the TCP port, make sure you set $Conf{ServerMesgSecret}
+# too!
+#
+$Conf{ServerPort} = -1;
+
+#
+# Shared secret to make the TCP port secure.  Set this to a hard to guess
+# string if you enable the TCP port (ie: $Conf{ServerPort} > 0).
+#
+# To avoid possible attacks via the TCP socket interface, every client
+# message is protected by an MD5 digest. The MD5 digest includes four
+# items:
+#   - a seed that is sent to the client when the connection opens
+#   - a sequence number that increments for each message
+#   - a shared secret that is stored in $Conf{ServerMesgSecret}
+#   - the message itself.
+#
+# The message is sent in plain text preceded by the MD5 digest.  A
+# snooper can see the plain-text seed sent by BackupPC and plain-text
+# message from the client, but cannot construct a valid MD5 digest since
+# the secret $Conf{ServerMesgSecret} is unknown.  A replay attack is
+# not possible since the seed changes on a per-connection and
+# per-message basis.
+#
+$Conf{ServerMesgSecret} = '';
+
+#
+# PATH setting for BackupPC.  An explicit value is necessary
+# for taint mode.  Value shouldn't matter too much since
+# all execs use explicit paths.  However, taint mode in perl
+# will complain if this directory is world writable.
+#
+$Conf{MyPath} = '/bin';
+
+#
+# Permission mask for directories and files created by BackupPC.
+# Default value prevents any access from group other, and prevents
+# group write.
+#
+$Conf{UmaskMode} = 23;
+
+#
+# Times at which we wake up, check all the PCs, and schedule necessary
+# backups.  Times are measured in hours since midnight.  Can be
+# fractional if necessary (eg: 4.25 means 4:15am).
+#
+# If the hosts you are backing up are always connected to the network
+# you might have only one or two wakeups each night.  This will keep
+# the backup activity after hours.  On the other hand, if you are backing
+# up laptops that are only intermittently connected to the network you
+# will want to have frequent wakeups (eg: hourly) to maximize the chance
+# that each laptop is backed up.
+#
+# Examples:
+#     $Conf{WakeupSchedule} = [22.5];         # once per day at 10:30 pm.
+#     $Conf{WakeupSchedule} = [2,4,6,8,10,12,14,16,18,20,22];  # every 2 hours
+#
+# The default value is every hour except midnight.
+#
+# The first entry of $Conf{WakeupSchedule} is when BackupPC_nightly is run.
+# You might want to re-arrange the entries in $Conf{WakeupSchedule}
+# (they don't have to be ascending) so that the first entry is when
+# you want BackupPC_nightly to run (eg: when you don't expect a lot
+# of regular backups to run).
+#
+$Conf{WakeupSchedule} = [
+  1,
+  2,
+  3,
+  4,
+  5,
+  6,
+  7,
+  8,
+  9,
+  10,
+  11,
+  12,
+  13,
+  14,
+  15,
+  16,
+  17,
+  18,
+  19,
+  20,
+  21,
+  22,
+  23
+];
+
+#
+# Maximum number of simultaneous backups to run.  If there
+# are no user backup requests then this is the maximum number
+# of simultaneous backups.
+#
+$Conf{MaxBackups} = 2;
+
+#
+# Additional number of simultaneous backups that users can run.
+# As many as $Conf{MaxBackups} + $Conf{MaxUserBackups} requests can
+# run at the same time.
+#
+$Conf{MaxUserBackups} = 4;
+
+#
+# Maximum number of pending link commands. New backups will only be
+# started if there are no more than $Conf{MaxPendingCmds} plus
+# $Conf{MaxBackups} number of pending link commands, plus running jobs.
+# This limit is to make sure BackupPC doesn't fall too far behind in
+# running BackupPC_link commands.
+#
+$Conf{MaxPendingCmds} = 15;
+
+#
+# Nice level at which CmdQueue commands (eg: BackupPC_link and
+# BackupPC_nightly) are run at.
+#
+$Conf{CmdQueueNice} = 10;
+
+#
+# How many BackupPC_nightly processes to run in parallel.
+#
+# Each night, at the first wakeup listed in $Conf{WakeupSchedule},
+# BackupPC_nightly is run.  Its job is to remove unneeded files
+# in the pool, ie: files that only have one link.  To avoid race
+# conditions, BackupPC_nightly and BackupPC_link cannot run at
+# the same time.  Starting in v3.0.0, BackupPC_nightly can run
+# concurrently with backups (BackupPC_dump).
+#
+# So to reduce the elapsed time, you might want to increase this
+# setting to run several BackupPC_nightly processes in parallel
+# (eg: 4, or even 8).
+#
+$Conf{MaxBackupPCNightlyJobs} = 2;
+
+#
+# How many days (runs) it takes BackupPC_nightly to traverse the
+# entire pool.  Normally this is 1, which means every night it runs,
+# it does traverse the entire pool removing unused pool files.
+#
+# Other valid values are 2, 4, 8, 16.  This causes BackupPC_nightly to
+# traverse 1/2, 1/4, 1/8 or 1/16th of the pool each night, meaning it
+# takes 2, 4, 8 or 16 days to completely traverse the pool.  The
+# advantage is that each night the running time of BackupPC_nightly
+# is reduced roughly in proportion, since the total job is split
+# over multiple days.  The disadvantage is that unused pool files
+# take longer to get deleted, which will slightly increase disk
+# usage.
+#
+# Note that even when $Conf{BackupPCNightlyPeriod} > 1, BackupPC_nightly
+# still runs every night.  It just does less work each time it runs.
+#
+# Examples:
+#
+#    $Conf{BackupPCNightlyPeriod} = 1;   # entire pool is checked every night
+#
+#    $Conf{BackupPCNightlyPeriod} = 2;   # two days to complete pool check
+#                                        # (different half each night)
+#
+#    $Conf{BackupPCNightlyPeriod} = 4;   # four days to complete pool check
+#                                        # (different quarter each night)
+#
+$Conf{BackupPCNightlyPeriod} = 1;
+
+#
+# Maximum number of log files we keep around in log directory.
+# These files are aged nightly.  A setting of 14 means the log
+# directory will contain about 2 weeks of old log files, in
+# particular at most the files LOG, LOG.0, LOG.1, ... LOG.13
+# (except today's LOG, these files will have a .z extension if
+# compression is on).
+#
+# If you decrease this number after BackupPC has been running for a
+# while you will have to manually remove the older log files.
+#
+$Conf{MaxOldLogFiles} = 14;
+
+#
+# Full path to the df command.  Security caution: normal users
+# should not allowed to write to this file or directory.
+#
+$Conf{DfPath} = '/bin/df';
+
+#
+# Command to run df.  The following variables are substituted at run-time:
+#
+#   $dfPath      path to df ($Conf{DfPath})
+#   $topDir      top-level BackupPC data directory
+#
+# Note: all Cmds are executed directly without a shell, so the prog name
+# needs to be a full path and you can't include shell syntax like
+# redirection and pipes; put that in a script if you need it.
+#
+$Conf{DfCmd} = '$dfPath $topDir';
+
+#
+# Full path to various commands for archiving
+#
+$Conf{SplitPath} = '/usr/bin/split';
+$Conf{ParPath} = '/usr/bin/par2';
+$Conf{CatPath} = '/bin/cat';
+$Conf{GzipPath} = '/bin/gzip';
+$Conf{Bzip2Path} = '/bin/bzip2';
+
+#
+# Maximum threshold for disk utilization on the __TOPDIR__ filesystem.
+# If the output from $Conf{DfPath} reports a percentage larger than
+# this number then no new regularly scheduled backups will be run.
+# However, user requested backups (which are usually incremental and
+# tend to be small) are still performed, independent of disk usage.
+# Also, currently running backups will not be terminated when the disk
+# usage exceeds this number.
+#
+$Conf{DfMaxUsagePct} = 95;
+
+#
+# How long BackupPC_trashClean sleeps in seconds between each check
+# of the trash directory.  Once every 5 minutes should be reasonable.
+#
+$Conf{TrashCleanSleepSec} = 300;
+
+#
+# List of DHCP address ranges we search looking for PCs to backup.
+# This is an array of hashes for each class C address range.
+# This is only needed if hosts in the conf/hosts file have the
+# dhcp flag set.
+#
+# Examples:
+#    # to specify 192.10.10.20 to 192.10.10.250 as the DHCP address pool
+#    $Conf{DHCPAddressRanges} = [
+#        {
+#            ipAddrBase => '192.10.10',
+#            first => 20,
+#            last  => 250,
+#        },
+#    ];
+#    # to specify two pools (192.10.10.20-250 and 192.10.11.10-50)
+#    $Conf{DHCPAddressRanges} = [
+#        {
+#            ipAddrBase => '192.10.10',
+#            first => 20,
+#            last  => 250,
+#        },
+#        {
+#            ipAddrBase => '192.10.11',
+#            first => 10,
+#            last  => 50,
+#        },
+#    ];
+#
+$Conf{DHCPAddressRanges} = [];
+
+#
+# The BackupPC user.
+#
+$Conf{BackupPCUser} = 'backuppc';
+
+#
+# Important installation directories:
+#
+#   TopDir     - where all the backup data is stored
+#   ConfDir    - where the main config and hosts files resides
+#   LogDir     - where log files and other transient information
+#   InstallDir - where the bin, lib and doc installation dirs reside.
+#                Note: you cannot change this value since all the
+#                perl scripts include this path.  You must reinstall
+#                with configure.pl to change InstallDir.
+#   CgiDir     - Apache CGI directory for BackupPC_Admin
+#
+# Note: it is STRONGLY recommended that you don't change the
+# values here.  These are set at installation time and are here
+# for reference and are used during upgrades.
+#
+# Instead of changing TopDir here it is recommended that you use
+# a symbolic link to the new location, or mount the new BackupPC
+# store at the existing $Conf{TopDir} setting.
+#
+$Conf{TopDir} = '/var/lib/backuppc';
+$Conf{ConfDir} = '/etc/backuppc';
+$Conf{LogDir} = '/var/lib/backuppc/log';
+$Conf{InstallDir} = '/usr/share/backuppc';
+$Conf{CgiDir} = '/usr/share/backuppc/cgi-bin';
+
+#
+# Whether BackupPC and the CGI script BackupPC_Admin verify that they
+# are really running as user $Conf{BackupPCUser}.  If this flag is set
+# and the effective user id (euid) differs from $Conf{BackupPCUser}
+# then both scripts exit with an error.  This catches cases where
+# BackupPC might be accidently started as root or the wrong user,
+# or if the CGI script is not installed correctly.
+#
+$Conf{BackupPCUserVerify} = '1';
+
+#
+# Maximum number of hardlinks supported by the $TopDir file system
+# that BackupPC uses.  Most linux or unix file systems should support
+# at least 32000 hardlinks per file, or 64000 in other cases.  If a pool
+# file already has this number of hardlinks, a new pool file is created
+# so that new hardlinks can be accommodated.  This limit will only
+# be hit if an identical file appears at least this number of times
+# across all the backups.
+#
+$Conf{HardLinkMax} = 31999;
+
+#
+# Advanced option for asking BackupPC to load additional perl modules.
+# Can be a list (array ref) of module names to load at startup.
+#
+$Conf{PerlModuleLoad} = undef;
+
+#
+# Path to init.d script and command to use that script to start the
+# server from the CGI interface.  The following variables are substituted
+# at run-time:
+#
+#   $sshPath           path to ssh ($Conf{SshPath})
+#   $serverHost        same as $Conf{ServerHost}
+#   $serverInitdPath   path to init.d script ($Conf{ServerInitdPath})
+#
+# Example:
+#
+# $Conf{ServerInitdPath}     = '/etc/init.d/backuppc';
+# $Conf{ServerInitdStartCmd} = '$sshPath -q -x -l root $serverHost'
+#                            . ' $serverInitdPath start'
+#                            . ' < /dev/null >& /dev/null';
+#
+# Note: all Cmds are executed directly without a shell, so the prog name
+# needs to be a full path and you can't include shell syntax like
+# redirection and pipes; put that in a script if you need it.
+#
+$Conf{ServerInitdPath} = undef;
+$Conf{ServerInitdStartCmd} = '';
+
+
+###########################################################################
+# What to backup and when to do it
+# (can be overridden in the per-PC config.pl)
+###########################################################################
+#
+# Minimum period in days between full backups. A full dump will only be
+# done if at least this much time has elapsed since the last full dump,
+# and at least $Conf{IncrPeriod} days has elapsed since the last
+# successful dump.
+#
+# Typically this is set slightly less than an integer number of days. The
+# time taken for the backup, plus the granularity of $Conf{WakeupSchedule}
+# will make the actual backup interval a bit longer.
+#
+$Conf{FullPeriod} = '6.97';
+
+#
+# Minimum period in days between incremental backups (a user requested
+# incremental backup will be done anytime on demand).
+#
+# Typically this is set slightly less than an integer number of days. The
+# time taken for the backup, plus the granularity of $Conf{WakeupSchedule}
+# will make the actual backup interval a bit longer.
+#
+$Conf{IncrPeriod} = '0.97';
+
+#
+# Number of full backups to keep.  Must be >= 1.
+#
+# In the steady state, each time a full backup completes successfully
+# the oldest one is removed.  If this number is decreased, the
+# extra old backups will be removed.
+#
+# If filling of incremental dumps is off the oldest backup always
+# has to be a full (ie: filled) dump.  This might mean one or two
+# extra full dumps are kept until the oldest incremental backups expire.
+#
+# Exponential backup expiry is also supported.  This allows you to specify:
+#
+#   - num fulls to keep at intervals of 1 * $Conf{FullPeriod}, followed by
+#   - num fulls to keep at intervals of 2 * $Conf{FullPeriod},
+#   - num fulls to keep at intervals of 4 * $Conf{FullPeriod},
+#   - num fulls to keep at intervals of 8 * $Conf{FullPeriod},
+#   - num fulls to keep at intervals of 16 * $Conf{FullPeriod},
+#
+# and so on.  This works by deleting every other full as each expiry
+# boundary is crossed.
+#
+# Exponential expiry is specified using an array for $Conf{FullKeepCnt}:
+#
+#   $Conf{FullKeepCnt} = [4, 2, 3];
+#
+# Entry #n specifies how many fulls to keep at an interval of
+# 2^n * $Conf{FullPeriod} (ie: 1, 2, 4, 8, 16, 32, ...).
+#
+# The example above specifies keeping 4 of the most recent full backups
+# (1 week interval) two full backups at 2 week intervals, and 3 full
+# backups at 4 week intervals, eg:
+#
+#    full 0 19 weeks old   \
+#    full 1 15 weeks old    >---  3 backups at 4 * $Conf{FullPeriod}
+#    full 2 11 weeks old   / 
+#    full 3  7 weeks old   \____  2 backups at 2 * $Conf{FullPeriod}
+#    full 4  5 weeks old   /
+#    full 5  3 weeks old   \
+#    full 6  2 weeks old    \___  4 backups at 1 * $Conf{FullPeriod}
+#    full 7  1 week old     /
+#    full 8  current       /
+#
+# On a given week the spacing might be less than shown as each backup
+# ages through each expiry period.  For example, one week later, a
+# new full is completed and the oldest is deleted, giving:
+#
+#    full 0 16 weeks old   \
+#    full 1 12 weeks old    >---  3 backups at 4 * $Conf{FullPeriod}
+#    full 2  8 weeks old   / 
+#    full 3  6 weeks old   \____  2 backups at 2 * $Conf{FullPeriod}
+#    full 4  4 weeks old   /
+#    full 5  3 weeks old   \
+#    full 6  2 weeks old    \___  4 backups at 1 * $Conf{FullPeriod}
+#    full 7  1 week old     /
+#    full 8  current       /
+#
+# You can specify 0 as a count (except in the first entry), and the
+# array can be as long as you wish.  For example:
+#
+#   $Conf{FullKeepCnt} = [4, 0, 4, 0, 0, 2];
+#
+# This will keep 10 full dumps, 4 most recent at 1 * $Conf{FullPeriod},
+# followed by 4 at an interval of 4 * $Conf{FullPeriod} (approx 1 month
+# apart), and then 2 at an interval of 32 * $Conf{FullPeriod} (approx
+# 7-8 months apart).
+#
+# Example: these two settings are equivalent and both keep just
+# the four most recent full dumps:
+#
+#    $Conf{FullKeepCnt} = 4;
+#    $Conf{FullKeepCnt} = [4];
+#
+$Conf{FullKeepCnt} = [
+  1
+];
+
+#
+# Very old full backups are removed after $Conf{FullAgeMax} days.  However,
+# we keep at least $Conf{FullKeepCntMin} full backups no matter how old
+# they are.
+#
+# Note that $Conf{FullAgeMax} will be increased to $Conf{FullKeepCnt}
+# times $Conf{FullPeriod} if $Conf{FullKeepCnt} specifies enough
+# full backups to exceed $Conf{FullAgeMax}.
+#
+$Conf{FullKeepCntMin} = 1;
+$Conf{FullAgeMax} = 90;
+
+#
+# Number of incremental backups to keep.  Must be >= 1.
+#
+# In the steady state, each time an incr backup completes successfully
+# the oldest one is removed.  If this number is decreased, the
+# extra old backups will be removed.
+#
+$Conf{IncrKeepCnt} = 6;
+
+#
+# Very old incremental backups are removed after $Conf{IncrAgeMax} days.
+# However, we keep at least $Conf{IncrKeepCntMin} incremental backups no
+# matter how old they are.
+#
+$Conf{IncrKeepCntMin} = 1;
+$Conf{IncrAgeMax} = 30;
+
+#
+# Level of each incremental.  "Level" follows the terminology
+# of dump(1).  A full backup has level 0.  A new incremental
+# of level N will backup all files that have changed since
+# the most recent backup of a lower level.
+#
+# The entries of $Conf{IncrLevels} apply in order to each
+# incremental after each full backup.  It wraps around until
+# the next full backup.  For example, these two settings
+# have the same effect:
+#
+#       $Conf{IncrLevels} = [1, 2, 3];
+#       $Conf{IncrLevels} = [1, 2, 3, 1, 2, 3];
+#
+# This means the 1st and 4th incrementals (level 1) go all
+# the way back to the full.  The 2nd and 3rd (and 5th and
+# 6th) backups just go back to the immediate preceeding
+# incremental.
+#
+# Specifying a sequence of multi-level incrementals will
+# usually mean more than $Conf{IncrKeepCnt} incrementals will
+# need to be kept, since lower level incrementals are needed
+# to merge a complete view of a backup.  For example, with
+#
+#       $Conf{FullPeriod}  = 7;
+#       $Conf{IncrPeriod}  = 1;
+#       $Conf{IncrKeepCnt} = 6;
+#       $Conf{IncrLevels}  = [1, 2, 3, 4, 5, 6];
+#
+# there will be up to 11 incrementals in this case: 
+#
+#       backup #0  (full, level 0, oldest)
+#       backup #1  (incr, level 1)
+#       backup #2  (incr, level 2)
+#       backup #3  (incr, level 3)
+#       backup #4  (incr, level 4)
+#       backup #5  (incr, level 5)
+#       backup #6  (incr, level 6)
+#       backup #7  (full, level 0)
+#       backup #8  (incr, level 1)
+#       backup #9  (incr, level 2)
+#       backup #10 (incr, level 3)
+#       backup #11 (incr, level 4)
+#       backup #12 (incr, level 5, newest)
+#
+# Backup #1 (the oldest level 1 incremental) can't be deleted
+# since backups 2..6 depend on it.  Those 6 incrementals can't
+# all be deleted since that would only leave 5 (#8..12).
+# When the next incremental happens (level 6), the complete
+# set of 6 older incrementals (#1..6) will be deleted, since
+# that maintains the required number ($Conf{IncrKeepCnt})
+# of incrementals.  This situation is reduced if you set
+# shorter chains of multi-level incrementals, eg:
+#
+#       $Conf{IncrLevels}  = [1, 2, 3];
+#
+# would only have up to 2 extra incremenals before all 3
+# are deleted.
+#
+# BackupPC as usual merges the full and the sequence
+# of incrementals together so each incremental can be
+# browsed and restored as though it is a complete backup.
+# If you specify a long chain of incrementals then more
+# backups need to be merged when browsing, restoring,
+# or getting the starting point for rsync backups.
+# In the example above (levels 1..6), browing backup
+# #6 requires 7 different backups (#0..6) to be merged.
+#
+# Because of this merging and the additional incrementals
+# that need to be kept, it is recommended that some
+# level 1 incrementals be included in $Conf{IncrLevels}.
+#
+# Prior to version 3.0 incrementals were always level 1,
+# meaning each incremental backed up all the files that
+# changed since the last full.
+#
+$Conf{IncrLevels} = [
+  1
+];
+
+#
+# Disable all full and incremental backups.  These settings are
+# useful for a client that is no longer being backed up
+# (eg: a retired machine), but you wish to keep the last
+# backups available for browsing or restoring to other machines.
+#
+# There are three values for $Conf{BackupsDisable}:
+#
+#   0    Backups are enabled.
+#
+#   1    Don't do any regular backups on this client.  Manually
+#        requested backups (via the CGI interface) will still occur.
+#
+#   2    Don't do any backups on this client.  Manually requested
+#        backups (via the CGI interface) will be ignored.
+#
+# In versions prior to 3.0 Backups were disabled by setting
+# $Conf{FullPeriod} to -1 or -2.
+#
+$Conf{BackupsDisable} = 0;
+
+#
+# A failed full backup is saved as a partial backup.  The rsync
+# XferMethod can take advantage of the partial full when the next
+# backup is run. This parameter sets the age of the partial full
+# in days: if the partial backup is older than this number of
+# days, then rsync will ignore (not use) the partial full when
+# the next backup is run.  If you set this to a negative value
+# then no partials will be saved.  If you set this to 0, partials
+# will be saved, but will not be used by the next backup.
+#
+# The default setting of 3 days means that a partial older than
+# 3 days is ignored when the next full backup is done.
+#
+$Conf{PartialAgeMax} = 3;
+
+#
+# Whether incremental backups are filled.  "Filling" means that the
+# most recent full (or filled) dump is merged into the new incremental
+# dump using hardlinks.  This makes an incremental dump look like a
+# full dump.  Prior to v1.03 all incremental backups were filled.
+# In v1.4.0 and later the default is off.
+#
+# BackupPC, and the cgi interface in particular, do the right thing on
+# un-filled incremental backups.  It will correctly display the merged
+# incremental backup with the most recent filled backup, giving the
+# un-filled incremental backups a filled appearance.  That means it
+# invisible to the user whether incremental dumps are filled or not.
+#
+# Filling backups takes a little extra disk space, and it does cost
+# some extra disk activity for filling, and later removal.  Filling
+# is no longer useful, since file mangling and compression doesn't
+# make a filled backup very useful. It's likely the filling option
+# will be removed from future versions: filling will be delegated to
+# the display and extraction of backup data.
+#
+# If filling is off, BackupPC makes sure that the oldest backup is
+# a full, otherwise the following incremental backups will be
+# incomplete.  This might mean an extra full backup has to be
+# kept until the following incremental backups expire.
+#
+# The default is off.  You can turn this on or off at any
+# time without affecting existing backups.
+#
+$Conf{IncrFill} = '0';
+
+#
+# Number of restore logs to keep.  BackupPC remembers information about
+# each restore request.  This number per client will be kept around before
+# the oldest ones are pruned.
+#
+# Note: files/dirs delivered via Zip or Tar downloads don't count as
+# restores.  Only the first restore option (where the files and dirs
+# are written to the host) count as restores that are logged.
+#
+$Conf{RestoreInfoKeepCnt} = 10;
+
+#
+# Number of archive logs to keep.  BackupPC remembers information
+# about each archive request.  This number per archive client will
+# be kept around before the oldest ones are pruned.
+#
+$Conf{ArchiveInfoKeepCnt} = 10;
+
+#
+# List of directories or files to backup.  If this is defined, only these
+# directories or files will be backed up.
+#
+# For Smb, only one of $Conf{BackupFilesExclude} and $Conf{BackupFilesOnly}
+# can be specified per share. If both are set for a particular share, then
+# $Conf{BackupFilesOnly} takes precedence and $Conf{BackupFilesExclude}
+# is ignored.
+#
+# This can be set to a string, an array of strings, or, in the case
+# of multiple shares, a hash of strings or arrays.  A hash is used
+# to give a list of directories or files to backup for each share
+# (the share name is the key).  If this is set to just a string or
+# array, and $Conf{SmbShareName} contains multiple share names, then
+# the setting is assumed to apply all shares.
+#
+# If a hash is used, a special key "*" means it applies to all
+# shares that don't have a specific entry.
+#
+# Examples:
+#    $Conf{BackupFilesOnly} = '/myFiles';
+#    $Conf{BackupFilesOnly} = ['/myFiles'];     # same as first example
+#    $Conf{BackupFilesOnly} = ['/myFiles', '/important'];
+#    $Conf{BackupFilesOnly} = {
+#       'c' => ['/myFiles', '/important'],      # these are for 'c' share
+#       'd' => ['/moreFiles', '/archive'],      # these are for 'd' share
+#    };
+#    $Conf{BackupFilesOnly} = {
+#       'c' => ['/myFiles', '/important'],      # these are for 'c' share
+#       '*' => ['/myFiles', '/important'],      # these are other shares
+#    };
+#
+$Conf{BackupFilesOnly} = {};
+
+#
+# List of directories or files to exclude from the backup.  For Smb,
+# only one of $Conf{BackupFilesExclude} and $Conf{BackupFilesOnly}
+# can be specified per share.  If both are set for a particular share,
+# then $Conf{BackupFilesOnly} takes precedence and
+# $Conf{BackupFilesExclude} is ignored.
+#
+# This can be set to a string, an array of strings, or, in the case
+# of multiple shares, a hash of strings or arrays.  A hash is used
+# to give a list of directories or files to exclude for each share
+# (the share name is the key).  If this is set to just a string or
+# array, and $Conf{SmbShareName} contains multiple share names, then
+# the setting is assumed to apply to all shares.
+#
+# The exact behavior is determined by the underlying transport program,
+# smbclient or tar.  For smbclient the exlclude file list is passed into
+# the X option.  Simple shell wild-cards using "*" or "?" are allowed.
+#
+# For tar, if the exclude file contains a "/" it is assumed to be anchored
+# at the start of the string.  Since all the tar paths start with "./",
+# BackupPC prepends a "." if the exclude file starts with a "/".  Note
+# that GNU tar version >= 1.13.7 is required for the exclude option to
+# work correctly.  For linux or unix machines you should add
+# "/proc" to $Conf{BackupFilesExclude} unless you have specified
+# --one-file-system in $Conf{TarClientCmd} or --one-file-system in
+# $Conf{RsyncArgs}.  Also, for tar, do not use a trailing "/" in
+# the directory name: a trailing "/" causes the name to not match
+# and the directory will not be excluded.
+#
+# Users report that for smbclient you should specify a directory
+# followed by "/*", eg: "/proc/*", instead of just "/proc".
+#
+# FTP servers are traversed recursively so excluding directories will
+# also exclude its contents.  You can use the wildcard characters "*"
+# and "?" to define files for inclusion and exclusion.  Both
+# attributes $Conf{BackupFilesOnly} and $Conf{BackupFilesExclude} can
+# be defined for the same share.
+#
+# If a hash is used, a special key "*" means it applies to all
+# shares that don't have a specific entry.
+#
+# Examples:
+#    $Conf{BackupFilesExclude} = '/temp';
+#    $Conf{BackupFilesExclude} = ['/temp'];     # same as first example
+#    $Conf{BackupFilesExclude} = ['/temp', '/winnt/tmp'];
+#    $Conf{BackupFilesExclude} = {
+#       'c' => ['/temp', '/winnt/tmp'],         # these are for 'c' share
+#       'd' => ['/junk', '/dont_back_this_up'], # these are for 'd' share
+#    };
+#    $Conf{BackupFilesExclude} = {
+#       'c' => ['/temp', '/winnt/tmp'],         # these are for 'c' share
+#       '*' => ['/junk', '/dont_back_this_up'], # these are for other shares
+#    };
+#
+$Conf{BackupFilesExclude} = {};
+
+#
+# PCs that are always or often on the network can be backed up after
+# hours, to reduce PC, network and server load during working hours. For
+# each PC a count of consecutive good pings is maintained. Once a PC has
+# at least $Conf{BlackoutGoodCnt} consecutive good pings it is subject
+# to "blackout" and not backed up during hours and days specified by
+# $Conf{BlackoutPeriods}.
+#
+# To allow for periodic rebooting of a PC or other brief periods when a
+# PC is not on the network, a number of consecutive bad pings is allowed
+# before the good ping count is reset. This parameter is
+# $Conf{BlackoutBadPingLimit}.
+#
+# Note that bad and good pings don't occur with the same interval. If a
+# machine is always on the network, it will only be pinged roughly once
+# every $Conf{IncrPeriod} (eg: once per day). So a setting for
+# $Conf{BlackoutGoodCnt} of 7 means it will take around 7 days for a
+# machine to be subject to blackout. On the other hand, if a ping is
+# failed, it will be retried roughly every time BackupPC wakes up, eg,
+# every one or two hours. So a setting for $Conf{BlackoutBadPingLimit} of
+# 3 means that the PC will lose its blackout status after 3-6 hours of
+# unavailability.
+#
+# To disable the blackout feature set $Conf{BlackoutGoodCnt} to a negative
+# value.  A value of 0 will make all machines subject to blackout.  But
+# if you don't want to do any backups during the day it would be easier
+# to just set $Conf{WakeupSchedule} to a restricted schedule.
+#
+$Conf{BlackoutBadPingLimit} = 3;
+$Conf{BlackoutGoodCnt} = 7;
+
+#
+# One or more blackout periods can be specified.  If a client is
+# subject to blackout then no regular (non-manual) backups will
+# be started during any of these periods.  hourBegin and hourEnd
+# specify hours fro midnight and weekDays is a list of days of
+# the week where 0 is Sunday, 1 is Monday etc.
+#
+# For example:
+#
+#    $Conf{BlackoutPeriods} = [
+#	{
+#	    hourBegin =>  7.0,
+#	    hourEnd   => 19.5,
+#	    weekDays  => [1, 2, 3, 4, 5],
+#	},
+#    ];
+#
+# specifies one blackout period from 7:00am to 7:30pm local time
+# on Mon-Fri.
+#
+# The blackout period can also span midnight by setting
+# hourBegin > hourEnd, eg:
+#
+#    $Conf{BlackoutPeriods} = [
+#	{
+#	    hourBegin =>  7.0,
+#	    hourEnd   => 19.5,
+#	    weekDays  => [1, 2, 3, 4, 5],
+#	},
+#	{
+#	    hourBegin => 23,
+#	    hourEnd   =>  5,
+#	    weekDays  => [5, 6],
+#	},
+#    ];
+#
+# This specifies one blackout period from 7:00am to 7:30pm local time
+# on Mon-Fri, and a second period from 11pm to 5am on Friday and
+# Saturday night.
+#
+$Conf{BlackoutPeriods} = [
+  {
+    'hourEnd' => '19.5',
+    'weekDays' => [
+      1,
+      2,
+      3,
+      4,
+      5
+    ],
+    'hourBegin' => 7
+  }
+];
+
+#
+# A backup of a share that has zero files is considered fatal. This is
+# used to catch miscellaneous Xfer errors that result in no files being
+# backed up.  If you have shares that might be empty (and therefore an
+# empty backup is valid) you should set this flag to 0.
+#
+$Conf{BackupZeroFilesIsFatal} = '1';
+
+###########################################################################
+# How to backup a client
+# (can be overridden in the per-PC config.pl)
+###########################################################################
+#
+# What transport method to use to backup each host.  If you have
+# a mixed set of WinXX and linux/unix hosts you will need to override
+# this in the per-PC config.pl.
+#
+# The valid values are:
+#
+#   - 'smb':     backup and restore via smbclient and the SMB protocol.
+#                Easiest choice for WinXX.
+#
+#   - 'rsync':   backup and restore via rsync (via rsh or ssh).
+#                Best choice for linux/unix.  Good choice also for WinXX.
+#
+#   - 'rsyncd':  backup and restore via rsync daemon on the client.
+#                Best choice for linux/unix if you have rsyncd running on
+#                the client.  Good choice also for WinXX.
+#
+#   - 'tar':    backup and restore via tar, tar over ssh, rsh or nfs.
+#               Good choice for linux/unix.
+#
+#   - 'archive': host is a special archive host.  Backups are not done.
+#                An archive host is used to archive other host's backups
+#                to permanent media, such as tape, CDR or DVD.
+#               
+#
+$Conf{XferMethod} = 'smb';
+
+#
+# Level of verbosity in Xfer log files.  0 means be quiet, 1 will give
+# will give one line per file, 2 will also show skipped files on
+# incrementals, higher values give more output.
+#
+$Conf{XferLogLevel} = 1;
+
+#
+# Filename charset encoding on the client.  BackupPC uses utf8
+# on the server for filename encoding.  If this is empty, then
+# utf8 is assumed and client filenames will not be modified.
+# If set to a different encoding then filenames will converted
+# to/from utf8 automatically during backup and restore.
+#
+# If the file names displayed in the browser (eg: accents or special
+# characters) don't look right then it is likely you haven't set
+# $Conf{ClientCharset} correctly.
+#
+# If you are using smbclient on a WinXX machine, smbclient will convert
+# to the "unix charset" setting in smb.conf.  The default is utf8,
+# in which case leave $Conf{ClientCharset} empty since smbclient does
+# the right conversion.
+#
+# If you are using rsync on a WinXX machine then it does no conversion.
+# A typical WinXX encoding for latin1/western europe is 'cp1252',
+# so in this case set $Conf{ClientCharset} to 'cp1252'.
+#
+# On a linux or unix client, run "locale charmap" to see the client's
+# charset.  Set $Conf{ClientCharset} to this value.  A typical value
+# for english/US is 'ISO-8859-1'.
+#
+# Do "perldoc Encode::Supported" to see the list of possible charset
+# values.  The FAQ at http://www.cl.cam.ac.uk/~mgk25/unicode.html
+# is excellent, and http://czyborra.com/charsets/iso8859.html
+# provides more information on the iso-8859 charsets.
+#
+$Conf{ClientCharset} = '';
+
+#
+# Prior to 3.x no charset conversion was done by BackupPC.  Backups were
+# stored in what ever charset the XferMethod provided - typically utf8
+# for smbclient and the client's locale settings for rsync and tar (eg:
+# cp1252 for rsync on WinXX and perhaps iso-8859-1 with rsync on linux).
+# This setting tells BackupPC the charset that was used to store file
+# names in old backups taken with BackupPC 2.x, so that non-ascii file
+# names in old backups can be viewed and restored.
+#
+$Conf{ClientCharsetLegacy} = 'iso-8859-1';
+
+###########################################################################
+# Samba Configuration
+# (can be overwritten in the per-PC log file)
+###########################################################################
+#
+# Name of the host share that is backed up when using SMB.  This can be a
+# string or an array of strings if there are multiple shares per host.
+# Examples:
+#
+#   $Conf{SmbShareName} = 'c';          # backup 'c' share
+#   $Conf{SmbShareName} = ['c', 'd'];   # backup 'c' and 'd' shares
+#
+# This setting only matters if $Conf{XferMethod} = 'smb'.
+#
+$Conf{SmbShareName} = [
+  'C$'
+];
+
+#
+# Smbclient share user name.  This is passed to smbclient's -U argument.
+#
+# This setting only matters if $Conf{XferMethod} = 'smb'.
+#
+$Conf{SmbShareUserName} = '';
+
+#
+# Smbclient share password.  This is passed to smbclient via its PASSWD
+# environment variable.  There are several ways you can tell BackupPC
+# the smb share password.  In each case you should be very careful about
+# security.  If you put the password here, make sure that this file is
+# not readable by regular users!  See the "Setting up config.pl" section
+# in the documentation for more information.
+#
+# This setting only matters if $Conf{XferMethod} = 'smb'.
+#
+$Conf{SmbSharePasswd} = '';
+
+#
+# Full path for smbclient. Security caution: normal users should not
+# allowed to write to this file or directory.
+#
+# smbclient is from the Samba distribution. smbclient is used to
+# actually extract the incremental or full dump of the share filesystem
+# from the PC.
+#
+# This setting only matters if $Conf{XferMethod} = 'smb'.
+#
+$Conf{SmbClientPath} = '/usr/bin/smbclient';
+
+#
+# Command to run smbclient for a full dump.
+# This setting only matters if $Conf{XferMethod} = 'smb'.
+#
+# The following variables are substituted at run-time:
+#
+#    $smbClientPath   same as $Conf{SmbClientPath}
+#    $host            host to backup/restore
+#    $hostIP          host IP address
+#    $shareName       share name
+#    $userName        user name
+#    $fileList        list of files to backup (based on exclude/include)
+#    $I_option        optional -I option to smbclient
+#    $X_option        exclude option (if $fileList is an exclude list)
+#    $timeStampFile   start time for incremental dump
+#
+# Note: all Cmds are executed directly without a shell, so the prog name
+# needs to be a full path and you can't include shell syntax like
+# redirection and pipes; put that in a script if you need it.
+#
+$Conf{SmbClientFullCmd} = '$smbClientPath \\\\$host\\$shareName $I_option -U $userName -E -d 1 -c tarmode\\ full -Tc$X_option - $fileList';
+
+#
+# Command to run smbclient for an incremental dump.
+# This setting only matters if $Conf{XferMethod} = 'smb'.
+#
+# Same variable substitutions are applied as $Conf{SmbClientFullCmd}.
+#
+# Note: all Cmds are executed directly without a shell, so the prog name
+# needs to be a full path and you can't include shell syntax like
+# redirection and pipes; put that in a script if you need it.
+#
+$Conf{SmbClientIncrCmd} = '$smbClientPath \\\\$host\\$shareName $I_option -U $userName -E -d 1 -c tarmode\\ full -TcN$X_option $timeStampFile - $fileList';
+
+#
+# Command to run smbclient for a restore.
+# This setting only matters if $Conf{XferMethod} = 'smb'.
+#
+# Same variable substitutions are applied as $Conf{SmbClientFullCmd}.
+#
+# If your smb share is read-only then direct restores will fail.
+# You should set $Conf{SmbClientRestoreCmd} to undef and the
+# corresponding CGI restore option will be removed.
+#
+# Note: all Cmds are executed directly without a shell, so the prog name
+# needs to be a full path and you can't include shell syntax like
+# redirection and pipes; put that in a script if you need it.
+#
+$Conf{SmbClientRestoreCmd} = '$smbClientPath \\\\$host\\$shareName $I_option -U $userName -E -d 1 -c tarmode\\ full -Tx -';
+
+###########################################################################
+# Tar Configuration
+# (can be overwritten in the per-PC log file)
+###########################################################################
+#
+# Which host directories to backup when using tar transport.  This can be a
+# string or an array of strings if there are multiple directories to
+# backup per host.  Examples:
+#
+#   $Conf{TarShareName} = '/';			# backup everything
+#   $Conf{TarShareName} = '/home';		# only backup /home
+#   $Conf{TarShareName} = ['/home', '/src'];	# backup /home and /src
+#
+# The fact this parameter is called 'TarShareName' is for historical
+# consistency with the Smb transport options.  You can use any valid
+# directory on the client: there is no need for it to correspond to
+# any Smb share or device mount point.
+#
+# Note also that you can also use $Conf{BackupFilesOnly} to specify
+# a specific list of directories to backup.  It's more efficient to
+# use this option instead of $Conf{TarShareName} since a new tar is
+# run for each entry in $Conf{TarShareName}.
+#
+# On the other hand, if you add --one-file-system to $Conf{TarClientCmd}
+# you can backup each file system separately, which makes restoring one
+# bad file system easier.  In this case you would list all of the mount
+# points here, since you can't get the same result with
+# $Conf{BackupFilesOnly}:
+#
+#     $Conf{TarShareName} = ['/', '/var', '/data', '/boot'];
+#
+# This setting only matters if $Conf{XferMethod} = 'tar'.
+#
+$Conf{TarShareName} = [
+  '/'
+];
+
+#
+# Full command to run tar on the client.  GNU tar is required.  You will
+# need to fill in the correct paths for ssh2 on the local host (server)
+# and GNU tar on the client.  Security caution: normal users should not
+# allowed to write to these executable files or directories.
+#
+# See the documentation for more information about setting up ssh2 keys.
+#
+# If you plan to use NFS then tar just runs locally and ssh2 is not needed.
+# For example, assuming the client filesystem is mounted below /mnt/hostName,
+# you could use something like:
+#
+#    $Conf{TarClientCmd} = '$tarPath -c -v -f - -C /mnt/$host/$shareName'
+#                        . ' --totals';
+#
+# In the case of NFS or rsh you need to make sure BackupPC's privileges
+# are sufficient to read all the files you want to backup.  Also, you
+# will probably want to add "/proc" to $Conf{BackupFilesExclude}.
+#
+# The following variables are substituted at run-time:
+#
+#   $host        host name
+#   $hostIP      host's IP address
+#   $incrDate    newer-than date for incremental backups
+#   $shareName   share name to backup (ie: top-level directory path)
+#   $fileList    specific files to backup or exclude
+#   $tarPath     same as $Conf{TarClientPath}
+#   $sshPath     same as $Conf{SshPath}
+#
+# If a variable is followed by a "+" it is shell escaped.  This is
+# necessary for the command part of ssh or rsh, since it ends up
+# getting passed through the shell.
+#
+# This setting only matters if $Conf{XferMethod} = 'tar'.
+#
+# Note: all Cmds are executed directly without a shell, so the prog name
+# needs to be a full path and you can't include shell syntax like
+# redirection and pipes; put that in a script if you need it.
+#
+$Conf{TarClientCmd} = '$sshPath -q -x -n -l root $host env LC_ALL=C $tarPath -c -v -f - -C $shareName+ --totals';
+
+#
+# Extra tar arguments for full backups.  Several variables are substituted at
+# run-time.  See $Conf{TarClientCmd} for the list of variable substitutions.
+#
+# If you are running tar locally (ie: without rsh or ssh) then remove the
+# "+" so that the argument is no longer shell escaped.
+#
+# This setting only matters if $Conf{XferMethod} = 'tar'.
+#
+$Conf{TarFullArgs} = '$fileList+';
+
+#
+# Extra tar arguments for incr backups.  Several variables are substituted at
+# run-time.  See $Conf{TarClientCmd} for the list of variable substitutions.
+#
+# Note that GNU tar has several methods for specifying incremental backups,
+# including:
+#
+#   --newer-mtime $incrDate+
+#          This causes a file to be included if the modification time is
+#          later than $incrDate (meaning its contents might have changed).
+#          But changes in the ownership or modes will not qualify the
+#          file to be included in an incremental.
+#
+#   --newer=$incrDate+
+#          This causes the file to be included if any attribute of the
+#          file is later than $incrDate, meaning either attributes or
+#          the modification time.  This is the default method.  Do
+#          not use --atime-preserve in $Conf{TarClientCmd} above,
+#          otherwise resetting the atime (access time) counts as an
+#          attribute change, meaning the file will always be included
+#          in each new incremental dump.
+#
+# If you are running tar locally (ie: without rsh or ssh) then remove the
+# "+" so that the argument is no longer shell escaped.
+#
+# This setting only matters if $Conf{XferMethod} = 'tar'.
+#
+$Conf{TarIncrArgs} = '--newer=$incrDate+ $fileList+';
+
+#
+# Full command to run tar for restore on the client.  GNU tar is required.
+# This can be the same as $Conf{TarClientCmd}, with tar's -c replaced by -x
+# and ssh's -n removed.
+#
+# See $Conf{TarClientCmd} for full details.
+#
+# This setting only matters if $Conf{XferMethod} = "tar".
+#
+# If you want to disable direct restores using tar, you should set
+# $Conf{TarClientRestoreCmd} to undef and the corresponding CGI
+# restore option will be removed.
+#
+# Note: all Cmds are executed directly without a shell, so the prog name
+# needs to be a full path and you can't include shell syntax like
+# redirection and pipes; put that in a script if you need it.
+#
+$Conf{TarClientRestoreCmd} = '$sshPath -q -x -l root $host env LC_ALL=C $tarPath -x -p --numeric-owner --same-owner -v -f - -C $shareName+';
+
+#
+# Full path for tar on the client. Security caution: normal users should not
+# allowed to write to this file or directory.
+#
+# This setting only matters if $Conf{XferMethod} = 'tar'.
+#
+$Conf{TarClientPath} = '/bin/tar';
+
+###########################################################################
+# Rsync/Rsyncd Configuration
+# (can be overwritten in the per-PC log file)
+###########################################################################
+#
+# Path to rsync executable on the client
+#
+$Conf{RsyncClientPath} = '/usr/bin/rsync';
+
+#
+# Full command to run rsync on the client machine.  The following variables
+# are substituted at run-time:
+#
+#        $host           host name being backed up
+#        $hostIP         host's IP address
+#        $shareName      share name to backup (ie: top-level directory path)
+#        $rsyncPath      same as $Conf{RsyncClientPath}
+#        $sshPath        same as $Conf{SshPath}
+#        $argList        argument list, built from $Conf{RsyncArgs},
+#                        $shareName, $Conf{BackupFilesExclude} and
+#                        $Conf{BackupFilesOnly}
+#
+# This setting only matters if $Conf{XferMethod} = 'rsync'.
+#
+$Conf{RsyncClientCmd} = '$sshPath -q -x -l root $host $rsyncPath $argList+';
+
+#
+# Full command to run rsync for restore on the client.  The following
+# variables are substituted at run-time:
+#
+#        $host           host name being backed up
+#        $hostIP         host's IP address
+#        $shareName      share name to backup (ie: top-level directory path)
+#        $rsyncPath      same as $Conf{RsyncClientPath}
+#        $sshPath        same as $Conf{SshPath}
+#        $argList        argument list, built from $Conf{RsyncArgs},
+#                        $shareName, $Conf{BackupFilesExclude} and
+#                        $Conf{BackupFilesOnly}
+#
+# This setting only matters if $Conf{XferMethod} = 'rsync'.
+#
+# Note: all Cmds are executed directly without a shell, so the prog name
+# needs to be a full path and you can't include shell syntax like
+# redirection and pipes; put that in a script if you need it.
+#
+$Conf{RsyncClientRestoreCmd} = '$sshPath -q -x -l root $host $rsyncPath $argList+';
+
+#
+# Share name to backup.  For $Conf{XferMethod} = "rsync" this should
+# be a file system path, eg '/' or '/home'.
+#
+# For $Conf{XferMethod} = "rsyncd" this should be the name of the module
+# to backup (ie: the name from /etc/rsynd.conf).
+#
+# This can also be a list of multiple file system paths or modules.
+# For example, by adding --one-file-system to $Conf{RsyncArgs} you
+# can backup each file system separately, which makes restoring one
+# bad file system easier.  In this case you would list all of the mount
+# points:
+#
+#     $Conf{RsyncShareName} = ['/', '/var', '/data', '/boot'];
+#
+$Conf{RsyncShareName} = [
+  '/'
+];
+
+#
+# Rsync daemon port on the client, for $Conf{XferMethod} = "rsyncd".
+#
+$Conf{RsyncdClientPort} = 873;
+
+#
+# Rsync daemon user name on client, for $Conf{XferMethod} = "rsyncd".
+# The user name and password are stored on the client in whatever file
+# the "secrets file" parameter in rsyncd.conf points to
+# (eg: /etc/rsyncd.secrets).
+#
+$Conf{RsyncdUserName} = '';
+
+#
+# Rsync daemon user name on client, for $Conf{XferMethod} = "rsyncd".
+# The user name and password are stored on the client in whatever file
+# the "secrets file" parameter in rsyncd.conf points to
+# (eg: /etc/rsyncd.secrets).
+#
+$Conf{RsyncdPasswd} = '';
+
+#
+# Whether authentication is mandatory when connecting to the client's
+# rsyncd.  By default this is on, ensuring that BackupPC will refuse to
+# connect to an rsyncd on the client that is not password protected.
+# Turn off at your own risk.
+#
+$Conf{RsyncdAuthRequired} = '1';
+
+#
+# When rsync checksum caching is enabled (by adding the
+# --checksum-seed=32761 option to $Conf{RsyncArgs}), the cached
+# checksums can be occasionally verified to make sure the file
+# contents matches the cached checksums.  This is to avoid the
+# risk that disk problems might cause the pool file contents to
+# get corrupted, but the cached checksums would make BackupPC
+# think that the file still matches the client.
+#
+# This setting is the probability (0 means never and 1 means always)
+# that a file will be rechecked.  Setting it to 0 means the checksums
+# will not be rechecked (unless there is a phase 0 failure).  Setting
+# it to 1 (ie: 100%) means all files will be checked, but that is
+# not a desirable setting since you are better off simply turning
+# caching off (ie: remove the --checksum-seed option).
+#   
+# The default of 0.01 means 1% (on average) of the files during a full
+# backup will have their cached checksum re-checked.
+#   
+# This setting has no effect unless checksum caching is turned on.
+#   
+$Conf{RsyncCsumCacheVerifyProb} = '0.01';
+
+#
+# Arguments to rsync for backup.  Do not edit the first set unless you
+# have a thorough understanding of how File::RsyncP works.
+#
+$Conf{RsyncArgs} = [
+  '--numeric-ids',
+  '--perms',
+  '--owner',
+  '--group',
+  '-D',
+  '--links',
+  '--hard-links',
+  '--times',
+  '--block-size=2048',
+  '--recursive'
+];
+
+#
+# Additional arguments added to RsyncArgs.  This can be used in
+# conbination with $Conf{RsyncArgs} to allow customization of
+# the rsync arguments on a part-client basis.  The standard
+# arguments go in $Conf{RsyncArgs} and $Conf{RsyncArgsExtra}
+# can be set on a per-client basis.
+#
+# Examples of additional arguments that should work are --exclude/--include,
+# eg:
+#
+#     $Conf{RsyncArgsExtra} = [
+#           '--exclude', '/proc',
+#           '--exclude', '*.tmp',
+#     ];
+#
+# Both $Conf{RsyncArgs} and $Conf{RsyncArgsExtra} are subject
+# to the following variable substitutions:
+#
+#        $client       client name being backed up
+#        $host         host name (could be different from client name if
+#                                 $Conf{ClientNameAlias} is set)
+#        $hostIP       IP address of host
+#        $confDir      configuration directory path
+#
+# This allows settings of the form:
+#
+#     $Conf{RsyncArgsExtra} = [
+#             '--exclude-from=$confDir/pc/$host.exclude',
+#     ];
+#
+$Conf{RsyncArgsExtra} = [];
+
+#
+# Arguments to rsync for restore.  Do not edit the first set unless you
+# have a thorough understanding of how File::RsyncP works.
+#
+# If you want to disable direct restores using rsync (eg: is the module
+# is read-only), you should set $Conf{RsyncRestoreArgs} to undef and
+# the corresponding CGI restore option will be removed.
+#
+# $Conf{RsyncRestoreArgs} is subject to the following variable
+# substitutions:
+#
+#        $client       client name being backed up
+#        $host         host name (could be different from client name if
+#                                 $Conf{ClientNameAlias} is set)
+#        $hostIP       IP address of host
+#        $confDir      configuration directory path
+#
+# Note: $Conf{RsyncArgsExtra} doesn't apply to $Conf{RsyncRestoreArgs}.
+#
+$Conf{RsyncRestoreArgs} = [
+  '--numeric-ids',
+  '--perms',
+  '--owner',
+  '--group',
+  '-D',
+  '--links',
+  '--hard-links',
+  '--times',
+  '--block-size=2048',
+  '--relative',
+  '--ignore-times',
+  '--recursive'
+];
+
+###########################################################################
+# FTP Configuration
+# (can be overwritten in the per-PC log file)
+##########################################################################
+#
+# Which host directories to backup when using FTP.  This can be a
+# string or an array of strings if there are multiple shares per host.
+#
+# This value must be specified in one of two ways: either as a
+# subdirectory of the 'share root' on the server, or as the absolute
+# path of the directory.
+#
+# In the following example, if the directory /home/username is the
+# root share of the ftp server with the given username, the following
+# two values will back up the same directory:
+#
+#    $Conf{FtpShareName} = 'www';                # www directory
+#    $Conf{FtpShareName} = '/home/username/www'; # same directory
+#
+# Path resolution is not supported; i.e.; you may not have an ftp
+# share path defined as '../otheruser' or '~/games'.
+#
+#  Multiple shares may also be specified, as with other protocols:
+#
+#    $Conf{FtpShareName} = [ 'www',
+#                            'bin',
+#                            'config' ];
+#
+# Note also that you can also use $Conf{BackupFilesOnly} to specify
+# a specific list of directories to backup.  It's more efficient to
+# use this option instead of $Conf{FtpShareName} since a new tar is
+# run for each entry in $Conf{FtpShareName}.
+#
+# This setting only matters if $Conf{XferMethod} = 'ftp'.
+#
+$Conf{FtpShareName} = [
+  ''
+];
+
+#
+# FTP user name.  This is used to log into the server.
+#
+# This setting is used only if $Conf{XferMethod} = 'ftp'.
+#
+$Conf{FtpUserName} = '';
+
+#
+# FTP user password.  This is used to log into the server.
+#
+# This setting is used only if $Conf{XferMethod} = 'ftp'.
+#
+$Conf{FtpPasswd} = '';
+
+#
+# Whether passive mode is used.  The correct setting depends upon
+# whether local or remote ports are accessible from the other machine,
+# which is affected by any firewall or routers between the FTP server
+# on the client and the BackupPC server.
+#
+# This setting is used only if $Conf{XferMethod} = 'ftp'.
+#
+$Conf{FtpPassive} = '1';
+
+#
+# Transfer block size. This sets the size of the amounts of data in
+# each frame. While undefined, this value takes the default value.
+#
+# This setting is used only if $Conf{XferMethod} = 'ftp'.
+#
+$Conf{FtpBlockSize} = 10240;
+
+#
+# The port of the ftp server.  If undefined, 21 is used.
+#
+# This setting is used only if $Conf{XferMethod} = 'ftp'.
+#
+$Conf{FtpPort} = 21;
+
+#
+# Connection timeout for FTP.  When undefined, the default is 120 seconds.
+#
+# This setting is used only if $Conf{XferMethod} = 'ftp'.
+#
+$Conf{FtpTimeout} = 120;
+
+#
+# Behaviour when BackupPC encounters symlinks on the FTP share.
+#
+# Symlinks cannot be restored via FTP, so the desired behaviour will
+# be different depending on the setup of the share. The default for
+# this behavor is 1.  Directory shares with more complicated directory
+# structures should consider other protocols.
+#
+$Conf{FtpFollowSymlinks} = '0';
+
+###########################################################################
+# Archive Configuration
+# (can be overwritten in the per-PC log file)
+###########################################################################
+#
+# Archive Destination
+#
+# The Destination of the archive
+# e.g. /tmp for file archive or /dev/nst0 for device archive
+#
+$Conf{ArchiveDest} = '/tmp';
+
+#
+# Archive Compression type
+#
+# The valid values are:
+#
+#   - 'none':  No Compression
+#
+#   - 'gzip':  Medium Compression. Recommended.
+#
+#   - 'bzip2': High Compression but takes longer.
+#
+$Conf{ArchiveComp} = 'gzip';
+
+#
+# Archive Parity Files
+#
+# The amount of Parity data to generate, as a percentage
+# of the archive size.
+# Uses the commandline par2 (par2cmdline) available from
+# http://parchive.sourceforge.net
+#
+# Only useful for file dumps.
+#
+# Set to 0 to disable this feature.
+#
+$Conf{ArchivePar} = '0';
+
+#
+# Archive Size Split
+#
+# Only for file archives. Splits the output into 
+# the specified size * 1,000,000.
+# e.g. to split into 650,000,000 bytes, specify 650 below.
+# 
+# If the value is 0, or if $Conf{ArchiveDest} is an existing file or
+# device (e.g. a streaming tape drive), this feature is disabled.
+#
+$Conf{ArchiveSplit} = 0;
+
+#
+# Archive Command
+#
+# This is the command that is called to actually run the archive process
+# for each host.  The following variables are substituted at run-time:
+#
+#   $Installdir    The installation directory of BackupPC
+#   $tarCreatePath The path to BackupPC_tarCreate
+#   $splitpath     The path to the split program
+#   $parpath       The path to the par2 program
+#   $host          The host to archive
+#   $backupnumber  The backup number of the host to archive
+#   $compression   The path to the compression program
+#   $compext       The extension assigned to the compression type
+#   $splitsize     The number of bytes to split archives into
+#   $archiveloc    The location to put the archive
+#   $parfile       The amount of parity data to create (percentage)
+#
+# Note: all Cmds are executed directly without a shell, so the prog name
+# needs to be a full path and you can't include shell syntax like
+# redirection and pipes; put that in a script if you need it.
+#
+$Conf{ArchiveClientCmd} = '$Installdir/bin/BackupPC_archiveHost $tarCreatePath $splitpath $parpath $host $backupnumber $compression $compext $splitsize $archiveloc $parfile *';
+
+#
+# Full path for ssh. Security caution: normal users should not
+# allowed to write to this file or directory.
+#
+$Conf{SshPath} = '/usr/bin/ssh';
+
+#
+# Full path for nmblookup. Security caution: normal users should not
+# allowed to write to this file or directory.
+#
+# nmblookup is from the Samba distribution. nmblookup is used to get the
+# netbios name, necessary for DHCP hosts.
+#
+$Conf{NmbLookupPath} = '/usr/bin/nmblookup';
+
+#
+# NmbLookup command.  Given an IP address, does an nmblookup on that
+# IP address.  The following variables are substituted at run-time:
+#
+#   $nmbLookupPath      path to nmblookup ($Conf{NmbLookupPath})
+#   $host               IP address
+#
+# This command is only used for DHCP hosts: given an IP address, this
+# command should try to find its NetBios name.
+#
+# Note: all Cmds are executed directly without a shell, so the prog name
+# needs to be a full path and you can't include shell syntax like
+# redirection and pipes; put that in a script if you need it.
+#
+$Conf{NmbLookupCmd} = '$nmbLookupPath -A $host';
+
+#
+# NmbLookup command.  Given a netbios name, finds that host by doing
+# a NetBios lookup.  Several variables are substituted at run-time:
+#
+#   $nmbLookupPath      path to nmblookup ($Conf{NmbLookupPath})
+#   $host               NetBios name
+#
+# In some cases you might need to change the broadcast address, for
+# example if nmblookup uses 192.168.255.255 by default and you find
+# that doesn't work, try 192.168.1.255 (or your equivalent class C
+# address) using the -B option:
+#
+#    $Conf{NmbLookupFindHostCmd} = '$nmbLookupPath -B 192.168.1.255 $host';
+#
+# If you use a WINS server and your machines don't respond to
+# multicast NetBios requests you can use this (replace 1.2.3.4
+# with the IP address of your WINS server):
+#
+#    $Conf{NmbLookupFindHostCmd} = '$nmbLookupPath -R -U 1.2.3.4 $host';
+#
+# This is preferred over multicast since it minimizes network traffic.
+#
+# Experiment manually for your site to see what form of nmblookup command
+# works.
+#
+# Note: all Cmds are executed directly without a shell, so the prog name
+# needs to be a full path and you can't include shell syntax like
+# redirection and pipes; put that in a script if you need it.
+#
+$Conf{NmbLookupFindHostCmd} = '$nmbLookupPath $host';
+
+#
+# For fixed IP address hosts, BackupPC_dump can also verify the netbios
+# name to ensure it matches the host name.  An error is generated if
+# they do not match.  Typically this flag is off.  But if you are going
+# to transition a bunch of machines from fixed host addresses to DHCP,
+# setting this flag is a great way to verify that the machines have
+# their netbios name set correctly before turning on DCHP.
+#
+$Conf{FixedIPNetBiosNameCheck} = '0';
+
+#
+# Full path to the ping command.  Security caution: normal users
+# should not be allowed to write to this file or directory.
+#
+# If you want to disable ping checking, set this to some program
+# that exits with 0 status, eg:
+#
+#     $Conf{PingPath} = '/bin/echo';
+#
+$Conf{PingPath} = '/bin/ping';
+$Conf{Ping6Path} = undef;
+
+#
+# Ping command.  The following variables are substituted at run-time:
+#
+#   $pingPath      path to ping ($Conf{PingPath})
+#   $host          host name
+#
+# Wade Brown reports that on solaris 2.6 and 2.7 ping -s returns the wrong
+# exit status (0 even on failure).  Replace with "ping $host 1", which
+# gets the correct exit status but we don't get the round-trip time.
+#
+# Note: all Cmds are executed directly without a shell, so the prog name
+# needs to be a full path and you can't include shell syntax like
+# redirection and pipes; put that in a script if you need it.
+#
+$Conf{PingCmd} = '$pingPath -c 1 $host';
+
+#
+# Maximum round-trip ping time in milliseconds.  This threshold is set
+# to avoid backing up PCs that are remotely connected through WAN or
+# dialup connections.  The output from ping -s (assuming it is supported
+# on your system) is used to check the round-trip packet time.  On your
+# local LAN round-trip times should be much less than 20msec.  On most
+# WAN or dialup connections the round-trip time will be typically more
+# than 20msec.  Tune if necessary.
+#
+$Conf{PingMaxMsec} = 100;
+
+#
+# Compression level to use on files.  0 means no compression.  Compression
+# levels can be from 1 (least cpu time, slightly worse compression) to
+# 9 (most cpu time, slightly better compression).  The recommended value
+# is 3.  Changing to 5, for example, will take maybe 20% more cpu time
+# and will get another 2-3% additional compression. See the zlib
+# documentation for more information about compression levels.
+#
+# Changing compression on or off after backups have already been done
+# will require both compressed and uncompressed pool files to be stored.
+# This will increase the pool storage requirements, at least until all
+# the old backups expire and are deleted.
+#
+# It is ok to change the compression value (from one non-zero value to
+# another non-zero value) after dumps are already done.  Since BackupPC
+# matches pool files by comparing the uncompressed versions, it will still
+# correctly match new incoming files against existing pool files.  The
+# new compression level will take effect only for new files that are
+# newly compressed and added to the pool.
+#
+# If compression was off and you are enabling compression for the first
+# time you can use the BackupPC_compressPool utility to compress the
+# pool.  This avoids having the pool grow to accommodate both compressed
+# and uncompressed backups.  See the documentation for more information.
+#
+# Note: compression needs the Compress::Zlib perl library.  If the
+# Compress::Zlib library can't be found then $Conf{CompressLevel} is
+# forced to 0 (compression off).
+#
+$Conf{CompressLevel} = 3;
+
+#
+# Timeout in seconds when listening for the transport program's
+# (smbclient, tar etc) stdout. If no output is received during this
+# time, then it is assumed that something has wedged during a backup,
+# and the backup is terminated.
+#
+# Note that stdout buffering combined with huge files being backed up
+# could cause longish delays in the output from smbclient that
+# BackupPC_dump sees, so in rare cases you might want to increase
+# this value.
+#
+# Despite the name, this parameter sets the timeout for all transport
+# methods (tar, smb etc).
+#
+$Conf{ClientTimeout} = 72000;
+
+#
+# Maximum number of log files we keep around in each PC's directory
+# (ie: pc/$host).  These files are aged monthly.  A setting of 12
+# means there will be at most the files LOG, LOG.0, LOG.1, ... LOG.11
+# in the pc/$host directory (ie: about a years worth).  (Except this
+# month's LOG, these files will have a .z extension if compression
+# is on).
+#
+# If you decrease this number after BackupPC has been running for a
+# while you will have to manually remove the older log files.
+#
+$Conf{MaxOldPerPCLogFiles} = 12;
+
+#
+# Optional commands to run before and after dumps and restores,
+# and also before and after each share of a dump.
+#
+# Stdout from these commands will be written to the Xfer (or Restore)
+# log file.  One example of using these commands would be to
+# shut down and restart a database server, dump a database
+# to files for backup, or doing a snapshot of a share prior
+# to a backup.  Example:
+#
+#    $Conf{DumpPreUserCmd} = '$sshPath -q -x -l root $host /usr/bin/dumpMysql';
+#
+# The following variable substitutions are made at run time for
+# $Conf{DumpPreUserCmd}, $Conf{DumpPostUserCmd}, $Conf{DumpPreShareCmd}
+# and $Conf{DumpPostShareCmd}:
+#
+#        $type         type of dump (incr or full)
+#        $xferOK       1 if the dump succeeded, 0 if it didn't
+#        $client       client name being backed up
+#        $host         host name (could be different from client name if
+#                                 $Conf{ClientNameAlias} is set)
+#        $hostIP       IP address of host
+#        $user         user name from the hosts file
+#        $moreUsers    list of additional users from the hosts file
+#        $share        the first share name (or current share for
+#                        $Conf{DumpPreShareCmd} and $Conf{DumpPostShareCmd})
+#        $shares       list of all the share names
+#        $XferMethod   value of $Conf{XferMethod} (eg: tar, rsync, smb)
+#        $sshPath      value of $Conf{SshPath},
+#        $cmdType      set to DumpPreUserCmd or DumpPostUserCmd
+#
+# The following variable substitutions are made at run time for
+# $Conf{RestorePreUserCmd} and $Conf{RestorePostUserCmd}:
+#
+#        $client       client name being backed up
+#        $xferOK       1 if the restore succeeded, 0 if it didn't
+#        $host         host name (could be different from client name if
+#                                 $Conf{ClientNameAlias} is set)
+#        $hostIP       IP address of host
+#        $user         user name from the hosts file
+#        $moreUsers    list of additional users from the hosts file
+#        $share        the first share name
+#        $XferMethod   value of $Conf{XferMethod} (eg: tar, rsync, smb)
+#        $sshPath      value of $Conf{SshPath},
+#        $type         set to "restore"
+#        $bkupSrcHost  host name of the restore source
+#        $bkupSrcShare share name of the restore source
+#        $bkupSrcNum   backup number of the restore source
+#        $pathHdrSrc   common starting path of restore source
+#        $pathHdrDest  common starting path of destination
+#        $fileList     list of files being restored
+#        $cmdType      set to RestorePreUserCmd or RestorePostUserCmd
+#
+# The following variable substitutions are made at run time for
+# $Conf{ArchivePreUserCmd} and $Conf{ArchivePostUserCmd}:
+#
+#        $client       client name being backed up
+#        $xferOK       1 if the archive succeeded, 0 if it didn't
+#        $host         Name of the archive host
+#        $user         user name from the hosts file
+#        $share        the first share name
+#        $XferMethod   value of $Conf{XferMethod} (eg: tar, rsync, smb)
+#        $HostList     list of hosts being archived
+#        $BackupList   list of backup numbers for the hosts being archived
+#        $archiveloc   location where the archive is sent to
+#        $parfile      amount of parity data being generated (percentage)
+#        $compression  compression program being used (eg: cat, gzip, bzip2)
+#        $compext      extension used for compression type (eg: raw, gz, bz2)
+#        $splitsize    size of the files that the archive creates
+#        $sshPath      value of $Conf{SshPath},
+#        $type         set to "archive"
+#        $cmdType      set to ArchivePreUserCmd or ArchivePostUserCmd
+#
+# Note: all Cmds are executed directly without a shell, so the prog name
+# needs to be a full path and you can't include shell syntax like
+# redirection and pipes; put that in a script if you need it.
+#
+$Conf{DumpPreUserCmd} = undef;
+$Conf{DumpPostUserCmd} = undef;
+$Conf{DumpPreShareCmd} = undef;
+$Conf{DumpPostShareCmd} = undef;
+$Conf{RestorePreUserCmd} = undef;
+$Conf{RestorePostUserCmd} = undef;
+$Conf{ArchivePreUserCmd} = undef;
+$Conf{ArchivePostUserCmd} = undef;
+
+#
+# Whether the exit status of each PreUserCmd and
+# PostUserCmd is checked.
+#
+# If set and the Dump/Restore/Archive Pre/Post UserCmd
+# returns a non-zero exit status then the dump/restore/archive
+# is aborted.  To maintain backward compatibility (where
+# the exit status in early versions was always ignored),
+# this flag defaults to 0.
+#
+# If this flag is set and the Dump/Restore/Archive PreUserCmd
+# fails then the matching Dump/Restore/Archive PostUserCmd is
+# not executed.  If DumpPreShareCmd returns a non-exit status,
+# then DumpPostShareCmd is not executed, but the DumpPostUserCmd
+# is still run (since DumpPreUserCmd must have previously
+# succeeded).
+#
+# An example of a DumpPreUserCmd that might fail is a script
+# that snapshots or dumps a database which fails because
+# of some database error.
+#
+$Conf{UserCmdCheckStatus} = '0';
+
+#
+# Override the client's host name.  This allows multiple clients
+# to all refer to the same physical host.  This should only be
+# set in the per-PC config file and is only used by BackupPC at
+# the last moment prior to generating the command used to backup
+# that machine (ie: the value of $Conf{ClientNameAlias} is invisible
+# everywhere else in BackupPC).  The setting can be a host name or
+# IP address, eg:
+#
+#         $Conf{ClientNameAlias} = 'realHostName';
+#         $Conf{ClientNameAlias} = '192.1.1.15';
+#
+# will cause the relevant smb/tar/rsync backup/restore commands to be
+# directed to realHostName, not the client name.
+#
+# Note: this setting doesn't work for hosts with DHCP set to 1.
+#
+$Conf{ClientNameAlias} = undef;
+
+###########################################################################
+# Email reminders, status and messages
+# (can be overridden in the per-PC config.pl)
+###########################################################################
+#
+# Full path to the sendmail command.  Security caution: normal users
+# should not allowed to write to this file or directory.
+#
+$Conf{SendmailPath} = '/usr/sbin/sendmail';
+
+#
+# Minimum period between consecutive emails to a single user.
+# This tries to keep annoying email to users to a reasonable
+# level.  Email checks are done nightly, so this number is effectively
+# rounded up (ie: 2.5 means a user will never receive email more
+# than once every 3 days).
+#
+$Conf{EMailNotifyMinDays} = '2.5';
+
+#
+# Name to use as the "from" name for email.  Depending upon your mail
+# handler this is either a plain name (eg: "admin") or a fully-qualified
+# name (eg: "admin@mydomain.com").
+#
+$Conf{EMailFromUserName} = 'backuppc';
+
+#
+# Destination address to an administrative user who will receive a
+# nightly email with warnings and errors.  If there are no warnings
+# or errors then no email will be sent.  Depending upon your mail
+# handler this is either a plain name (eg: "admin") or a fully-qualified
+# name (eg: "admin@mydomain.com").
+#
+$Conf{EMailAdminUserName} = 'backuppc';
+
+#
+# Destination domain name for email sent to users.  By default
+# this is empty, meaning email is sent to plain, unqualified
+# addresses.  Otherwise, set it to the destintation domain, eg:
+#
+#    $Cong{EMailUserDestDomain} = '@mydomain.com';
+#
+# With this setting user email will be set to 'user@mydomain.com'.
+#
+$Conf{EMailUserDestDomain} = '';
+
+#
+# This subject and message is sent to a user if their PC has never been
+# backed up.
+#
+# These values are language-dependent.  The default versions can be
+# found in the language file (eg: lib/BackupPC/Lang/en.pm).  If you
+# need to change the message, copy it here and edit it, eg:
+#
+#   $Conf{EMailNoBackupEverMesg} = <<'EOF';
+#   To: $user$domain
+#   cc:
+#   Subject: $subj
+#   
+#   Dear $userName,
+#   
+#   This is a site-specific email message.
+#   EOF
+#
+$Conf{EMailNoBackupEverSubj} = undef;
+$Conf{EMailNoBackupEverMesg} = undef;
+
+#
+# How old the most recent backup has to be before notifying user.
+# When there have been no backups in this number of days the user
+# is sent an email.
+#
+$Conf{EMailNotifyOldBackupDays} = 7;
+
+#
+# This subject and message is sent to a user if their PC has not recently
+# been backed up (ie: more than $Conf{EMailNotifyOldBackupDays} days ago).
+#
+# These values are language-dependent.  The default versions can be
+# found in the language file (eg: lib/BackupPC/Lang/en.pm).  If you
+# need to change the message, copy it here and edit it, eg:
+#
+#   $Conf{EMailNoBackupRecentMesg} = <<'EOF';
+#   To: $user$domain
+#   cc:
+#   Subject: $subj
+#   
+#   Dear $userName,
+#   
+#   This is a site-specific email message.
+#   EOF
+#
+$Conf{EMailNoBackupRecentSubj} = undef;
+$Conf{EMailNoBackupRecentMesg} = undef;
+
+#
+# How old the most recent backup of Outlook files has to be before
+# notifying user.
+#
+$Conf{EMailNotifyOldOutlookDays} = 5;
+
+#
+# This subject and message is sent to a user if their Outlook files have
+# not recently been backed up (ie: more than $Conf{EMailNotifyOldOutlookDays}
+# days ago).
+#
+# These values are language-dependent.  The default versions can be
+# found in the language file (eg: lib/BackupPC/Lang/en.pm).  If you
+# need to change the message, copy it here and edit it, eg:
+#
+#   $Conf{EMailOutlookBackupMesg} = <<'EOF';
+#   To: $user$domain
+#   cc:
+#   Subject: $subj
+#   
+#   Dear $userName,
+#   
+#   This is a site-specific email message.
+#   EOF
+#
+$Conf{EMailOutlookBackupSubj} = undef;
+$Conf{EMailOutlookBackupMesg} = undef;
+
+#
+# Additional email headers.  This sets to charset to
+# utf8.
+#
+$Conf{EMailHeaders} = 'MIME-Version: 1.0
+Content-Type: text/plain; charset="utf-8"
+';
+
+###########################################################################
+# CGI user interface configuration settings
+# (can be overridden in the per-PC config.pl)
+###########################################################################
+#
+# Normal users can only access information specific to their host.
+# They can start/stop/browse/restore backups.
+#
+# Administrative users have full access to all hosts, plus overall
+# status and log information.
+#
+# The administrative users are the union of the unix/linux group
+# $Conf{CgiAdminUserGroup} and the manual list of users, separated
+# by spaces, in $Conf{CgiAdminUsers}. If you don't want a group or
+# manual list of users set the corresponding configuration setting
+# to undef or an empty string.
+#
+# If you want every user to have admin privileges (careful!), set
+# $Conf{CgiAdminUsers} = '*'.
+#
+# Examples:
+#    $Conf{CgiAdminUserGroup} = 'admin';
+#    $Conf{CgiAdminUsers}     = 'craig celia';
+#    --> administrative users are the union of group admin, plus
+#      craig and celia.
+#
+#    $Conf{CgiAdminUserGroup} = '';
+#    $Conf{CgiAdminUsers}     = 'craig celia';
+#    --> administrative users are only craig and celia'.
+#
+$Conf{CgiAdminUserGroup} = 'backuppc';
+$Conf{CgiAdminUsers} = 'backuppc madhu';
+
+#
+# URL of the BackupPC_Admin CGI script.  Used for email messages.
+#
+$Conf{CgiURL} = 'http://storageblock/backuppc/index.cgi';
+
+#   
+# Language to use.  See lib/BackupPC/Lang for the list of supported
+# languages, which include English (en), French (fr), Spanish (es),
+# German (de), Italian (it), Dutch (nl), Polish (pl), Portuguese
+# Brazillian (pt_br) and Chinese (zh_CH).
+#
+# Currently the Language setting applies to the CGI interface and email
+# messages sent to users.  Log files and other text are still in English.
+#
+$Conf{Language} = 'en';
+
+#
+# User names that are rendered by the CGI interface can be turned
+# into links into their home page or other information about the
+# user.  To set this up you need to create two sprintf() strings,
+# that each contain a single '%s' that will be replaced by the user
+# name.  The default is a mailto: link.
+#
+# $Conf{CgiUserHomePageCheck} should be an absolute file path that
+# is used to check (via "-f") that the user has a valid home page.
+# Set this to undef or an empty string to turn off this check.
+#
+# $Conf{CgiUserUrlCreate} should be a full URL that points to the
+# user's home page.  Set this to undef or an empty string to turn
+# off generation of URLs for user names.
+#
+# Example:
+#    $Conf{CgiUserHomePageCheck} = '/var/www/html/users/%s.html';
+#    $Conf{CgiUserUrlCreate}     = 'http://myhost/users/%s.html';
+#    --> if /var/www/html/users/craig.html exists, then 'craig' will
+#      be rendered as a link to http://myhost/users/craig.html.
+#
+$Conf{CgiUserHomePageCheck} = '';
+$Conf{CgiUserUrlCreate} = 'mailto:%s';
+
+#
+# Date display format for CGI interface.  A value of 1 uses US-style
+# dates (MM/DD), a value of 2 uses full YYYY-MM-DD format, and zero
+# for international dates (DD/MM).
+#
+$Conf{CgiDateFormatMMDD} = 1;
+
+#
+# If set, the complete list of hosts appears in the left navigation
+# bar pull-down for administrators.  Otherwise, just the hosts for which
+# the user is listed in the host file (as either the user or in moreUsers)
+# are displayed.
+#
+$Conf{CgiNavBarAdminAllHosts} = '1';
+
+#
+# Enable/disable the search box in the navigation bar.
+#
+$Conf{CgiSearchBoxEnable} = '1';
+
+#
+# Additional navigation bar links.  These appear for both regular users
+# and administrators.  This is a list of hashes giving the link (URL)
+# and the text (name) for the link.  Specifying lname instead of name
+# uses the language specific string (ie: $Lang->{lname}) instead of
+# just literally displaying name.
+#
+$Conf{CgiNavBarLinks} = [
+  {
+    'link' => '?action=view&type=docs',
+    'lname' => 'Documentation',
+    'name' => undef
+  },
+  {
+    'name' => 'Wiki',
+    'lname' => undef,
+    'link' => 'http://backuppc.wiki.sourceforge.net'
+  },
+  {
+    'link' => 'http://backuppc.sourceforge.net',
+    'name' => 'SourceForge',
+    'lname' => undef
+  }
+];
+
+#
+# Hilight colors based on status that are used in the PC summary page.
+#
+$Conf{CgiStatusHilightColor} = {
+  'Reason_backup_failed' => '#ffcccc',
+  'Reason_backup_done' => '#ccffcc',
+  'Status_backup_in_progress' => '#66cc99',
+  'Reason_no_ping' => '#ffff99',
+  'Disabled_AllBackupsDisabled' => '#d1d1d1',
+  'Disabled_OnlyManualBackups' => '#d1d1d1',
+  'Reason_backup_canceled_by_user' => '#ff9900'
+};
+
+#
+# Additional CGI header text.
+#
+$Conf{CgiHeaders} = '<meta http-equiv="pragma" content="no-cache">';
+
+#
+# Directory where images are stored.  This directory should be below
+# Apache's DocumentRoot.  This value isn't used by BackupPC but is
+# used by configure.pl when you upgrade BackupPC.
+#
+# Example:
+#     $Conf{CgiImageDir} = '/var/www/htdocs/BackupPC';
+#
+$Conf{CgiImageDir} = '/usr/share/backuppc/image';
+
+#
+# Additional mappings of file name extenions to Content-Type for
+# individual file restore.  See $Ext2ContentType in BackupPC_Admin
+# for the default setting.  You can add additional settings here,
+# or override any default settings.  Example:
+#
+#     $Conf{CgiExt2ContentType} = {
+#                 'pl'  => 'text/plain',
+#          };
+#
+$Conf{CgiExt2ContentType} = {};
+
+#
+# URL (without the leading http://host) for BackupPC's image directory.
+# The CGI script uses this value to serve up image files.
+#
+# Example:
+#     $Conf{CgiImageDirURL} = '/BackupPC';
+#
+$Conf{CgiImageDirURL} = '/backuppc/image';
+
+#
+# CSS stylesheet "skin" for the CGI interface.  It is stored
+# in the $Conf{CgiImageDir} directory and accessed via the
+# $Conf{CgiImageDirURL} URL.
+#
+# For BackupPC v3.x several color, layout and font changes were made.
+# The previous v2.x version is available as BackupPC_stnd_orig.css, so
+# if you prefer the old skin, change this to BackupPC_stnd_orig.css.
+#
+$Conf{CgiCSSFile} = 'BackupPC_stnd.css';
+
+#
+# Whether the user is allowed to edit their per-PC config.
+#
+$Conf{CgiUserConfigEditEnable} = '1';
+
+#
+# Which per-host config variables a non-admin user is allowed
+# to edit.  Admin users can edit all per-host config variables,
+# even if disabled in this list.
+#
+# SECURITY WARNING: Do not let users edit any of the Cmd
+# config variables!  That's because a user could set a
+# Cmd to a shell script of their choice and it will be
+# run as the BackupPC user.  That script could do all
+# sorts of bad things.
+#
+$Conf{CgiUserConfigEdit} = {
+  'SmbClientRestoreCmd' => '0',
+  'FtpPasswd' => '1',
+  'BlackoutBadPingLimit' => '1',
+  'UserCmdCheckStatus' => '0',
+  'MaxOldPerPCLogFiles' => '1',
+  'ClientCharset' => '1',
+  'XferMethod' => '1',
+  'FullKeepCnt' => '1',
+  'ArchiveClientCmd' => '0',
+  'EMailNoBackupRecentSubj' => '1',
+  'FixedIPNetBiosNameCheck' => '1',
+  'FtpUserName' => '1',
+  'ClientNameAlias' => '1',
+  'FullPeriod' => '1',
+  'TarIncrArgs' => '1',
+  'SmbClientFullCmd' => '0',
+  'RsyncdAuthRequired' => '1',
+  'TarClientRestoreCmd' => '0',
+  'XferLogLevel' => '1',
+  'RestorePostUserCmd' => '0',
+  'FtpTimeout' => '1',
+  'BlackoutPeriods' => '1',
+  'SmbClientIncrCmd' => '0',
+  'SmbSharePasswd' => '1',
+  'RsyncArgsExtra' => '1',
+  'RestoreInfoKeepCnt' => '1',
+  'CompressLevel' => '1',
+  'RsyncClientRestoreCmd' => '0',
+  'RsyncArgs' => '1',
+  'TarFullArgs' => '1',
+  'EMailNotifyOldOutlookDays' => '1',
+  'RsyncdUserName' => '1',
+  'SmbShareUserName' => '1',
+  'NmbLookupFindHostCmd' => '0',
+  'DumpPostUserCmd' => '0',
+  'DumpPreUserCmd' => '0',
+  'EMailOutlookBackupSubj' => '1',
+  'EMailNotifyOldBackupDays' => '1',
+  'FtpRestoreEnabled' => '1',
+  'EMailOutlookBackupMesg' => '1',
+  'ArchiveSplit' => '1',
+  'FtpPort' => '1',
+  'BackupsDisable' => '1',
+  'PingCmd' => '0',
+  'IncrFill' => '1',
+  'NmbLookupCmd' => '0',
+  'IncrPeriod' => '1',
+  'RsyncClientCmd' => '0',
+  'FullAgeMax' => '1',
+  'IncrKeepCntMin' => '1',
+  'BackupFilesOnly' => '1',
+  'ArchiveInfoKeepCnt' => '1',
+  'EMailHeaders' => '1',
+  'EMailNotifyMinDays' => '1',
+  'IncrKeepCnt' => '1',
+  'TarClientCmd' => '0',
+  'BackupFilesExclude' => '1',
+  'FtpShareName' => '1',
+  'EMailNoBackupRecentMesg' => '1',
+  'PartialAgeMax' => '1',
+  'ClientCharsetLegacy' => '1',
+  'FtpFollowSymlinks' => '1',
+  'EMailAdminUserName' => '1',
+  'IncrLevels' => '1',
+  'ArchiveDest' => '1',
+  'ClientTimeout' => '1',
+  'EMailNoBackupEverMesg' => '1',
+  'PingMaxMsec' => '1',
+  'DumpPostShareCmd' => '0',
+  'RsyncRestoreArgs' => '1',
+  'RsyncCsumCacheVerifyProb' => '1',
+  'ArchivePar' => '1',
+  'EMailNoBackupEverSubj' => '1',
+  'FullKeepCntMin' => '1',
+  'RsyncShareName' => '1',
+  'EMailUserDestDomain' => '1',
+  'SmbShareName' => '1',
+  'DumpPreShareCmd' => '0',
+  'IncrAgeMax' => '1',
+  'RsyncClientPath' => '0',
+  'RsyncdClientPort' => '1',
+  'EMailFromUserName' => '1',
+  'RsyncdPasswd' => '1',
+  'TarClientPath' => '0',
+  'TarShareName' => '1',
+  'BlackoutGoodCnt' => '1',
+  'ArchivePostUserCmd' => '0',
+  'ArchivePreUserCmd' => '0',
+  'BackupZeroFilesIsFatal' => '1',
+  'FtpBlockSize' => '1',
+  'ArchiveComp' => '1',
+  'RestorePreUserCmd' => '0'
+};

hosts

@@ -0,0 +1,65 @@
+#============================================================= -*-perl-*-
+#
+# Host file list for BackupPC.
+#
+# DESCRIPTION
+#
+#   This file lists all the hosts that should be backed up by
+#   BackupPC.
+#
+#   Each line in the hosts file contains three fields, separated
+#   by white space:
+#
+#     - The host name.  If this host is a static IP address this
+#       must the machine's IP host name (ie: something that can
+#       be looked up using nslookup or DNS).  If this is a DHCP
+#       host then the host name must be the netbios name of the
+#       machine.  It is possible to have a host name that contains
+#       spaces, but that is discouraged.  Escape a space with "\", eg:
+#
+#                craigs\ pc
+#
+#     - DHCP flag.  Set to 0 if this is a static IP address host
+#       or if the machine can be found using nmblookup.  Otherwise,
+#       if the client can only be found by looking through the DHCP
+#       pool then set this to 1.
+#
+#     - User name (unix login/email name) of the user who "owns"
+#       or uses this machine.  This is the user who will be sent
+#       email about this machine, and this user will have permission
+#       to stop/start/browse/restore backups for this host.  This
+#       user name must match the name the user authenticates with
+#       via apache.
+#
+#     - Optional additional user names (comma separated, no white space) of
+#       users who are also allowed to stop/start/browse/restore backups
+#       for this client via the CGI interface.  These users are not sent
+#       email.  These do not need to be valid email names; they simply
+#       need to match the name the user authenticates with via apache.
+#
+# AUTHOR
+#   Craig Barratt  <craig@arraycomm.com>
+#
+# COPYRIGHT
+#   Copyright (C) 2001-2009  Craig Barratt
+#
+#   See http://backuppc.sourceforge.net.
+#
+#========================================================================
+
+#
+# The first non-comment non-empty line gives the field names and should
+# not be edited!!
+#
+host        dhcp    user    moreUsers     # <--- do not edit this line
+#farside    0       craig   jill,jeff     # <--- example static IP host entry
+#larson     1       bill                  # <--- example DHCP host entry
+#localhost	0	backuppc	
+admin01	0	backuppc
+auth01	0	root	
+mail01	0	root	
+portal01	0	root	
+vhost01	0	root	
+vpn01	0	root	
+kvmhost01	0	backuppc
+web01	0	backuppc

htpasswd

@@ -0,0 +1 @@
+backuppc:$apr1$weKGCQBX$wfmBM0ixb64Em.Z/yv0Sb0

kvmhost01.pl

@@ -0,0 +1,19 @@
+#
+# Local server backup of /etc as user backuppc
+#
+$Conf{XferMethod} = 'rsync';
+
+#$Conf{TarShareName} = ['/etc'];
+$Conf{RsyncShareName} = ['/root','/etc','/home'];
+
+$Conf{TarClientCmd} = '/usr/bin/env LC_ALL=C $tarPath -c -v -f - -C $shareName'
+                        . ' --totals';
+
+# remove extra shell escapes ($fileList+ etc.) that are
+# needed for remote backups but may break local ones
+$Conf{TarFullArgs} = '$fileList';
+$Conf{TarIncrArgs} = '--newer=$incrDate $fileList';
+$Conf{host} = 'kvmhost01.int.itguru.at'; 
+$Conf{ClientNameAlias} = '192.168.122.1';
+$Conf{RsyncClientCmd} = '$sshPath -l backuppc $host nice -n 19 sudo $rsyncPath $argList+';
+

localhost.pl

@@ -0,0 +1,14 @@
+#
+# Local server backup of /etc as user backuppc
+#
+$Conf{XferMethod} = 'tar';
+
+$Conf{TarShareName} = ['/etc'];
+
+$Conf{TarClientCmd} = '/usr/bin/env LC_ALL=C $tarPath -c -v -f - -C $shareName'
+                        . ' --totals';
+
+# remove extra shell escapes ($fileList+ etc.) that are
+# needed for remote backups but may break local ones
+$Conf{TarFullArgs} = '$fileList';
+$Conf{TarIncrArgs} = '--newer=$incrDate $fileList';

mail01.pl

@@ -0,0 +1,18 @@
+#
+# Local server backup of /etc as user backuppc
+#
+$Conf{XferMethod} = 'rsync';
+
+#$Conf{TarShareName} = ['/etc'];
+$Conf{RsyncShareName} = ['/root','/etc','/storage','/home','/var/lib'];
+
+$Conf{TarClientCmd} = '/usr/bin/env LC_ALL=C $tarPath -c -v -f - -C $shareName'
+                        . ' --totals';
+
+# remove extra shell escapes ($fileList+ etc.) that are
+# needed for remote backups but may break local ones
+$Conf{TarFullArgs} = '$fileList';
+$Conf{TarIncrArgs} = '--newer=$incrDate $fileList';
+$Conf{host} = 'mail01.int.itguru.at'; 
+$Conf{ClientNameAlias} = '192.168.122.20';
+

portal01.pl

@@ -0,0 +1,24 @@
+#
+# Local server backup of /etc as user backuppc
+#
+$Conf{XferMethod} = 'rsync';
+
+#$Conf{TarShareName} = ['/etc'];
+$Conf{RsyncShareName} = [
+  '/root',
+  '/etc',
+  '/var/www',
+  '/home',
+  '/var/lib'
+];
+
+$Conf{TarClientCmd} = '/usr/bin/env LC_ALL=C $tarPath -c -v -f - -C $shareName --totals';
+
+# remove extra shell escapes ($fileList+ etc.) that are
+# needed for remote backups but may break local ones
+$Conf{TarFullArgs} = '$fileList';
+$Conf{TarIncrArgs} = '--newer=$incrDate $fileList';
+$Conf{host} = 'portal01.int.itguru.at';
+$Conf{ClientNameAlias} = '192.168.122.19';
+
+$Conf{PingMaxMsec} = '50';

vhost01.pl

@@ -0,0 +1,18 @@
+#
+# Local server backup of /etc as user backuppc
+#
+$Conf{XferMethod} = 'rsync';
+
+#$Conf{TarShareName} = ['/etc'];
+$Conf{RsyncShareName} = ['/root','/etc','/home','/var/www'];
+
+$Conf{TarClientCmd} = '/usr/bin/env LC_ALL=C $tarPath -c -v -f - -C $shareName'
+                        . ' --totals';
+
+# remove extra shell escapes ($fileList+ etc.) that are
+# needed for remote backups but may break local ones
+$Conf{TarFullArgs} = '$fileList';
+$Conf{TarIncrArgs} = '--newer=$incrDate $fileList';
+$Conf{host} = 'vmhost01.int.itguru.at'; 
+$Conf{ClientNameAlias} = '144.76.238.57';
+

vpn01.pl

@@ -0,0 +1,18 @@
+#
+# Local server backup of /etc as user backuppc
+#
+$Conf{XferMethod} = 'rsync';
+
+#$Conf{TarShareName} = ['/etc'];
+$Conf{RsyncShareName} = ['/root','/etc','/home','/var/lib'];
+
+$Conf{TarClientCmd} = '/usr/bin/env LC_ALL=C $tarPath -c -v -f - -C $shareName'
+                        . ' --totals';
+
+# remove extra shell escapes ($fileList+ etc.) that are
+# needed for remote backups but may break local ones
+$Conf{TarFullArgs} = '$fileList';
+$Conf{TarIncrArgs} = '--newer=$incrDate $fileList';
+$Conf{host} = 'vpn01.int.itguru.at'; 
+$Conf{ClientNameAlias} = '192.168.122.13';
+

web01.pl

@@ -0,0 +1,25 @@
+#
+# Local server backup of /etc as user backuppc
+#
+$Conf{XferMethod} = 'rsync';
+
+#$Conf{TarShareName} = ['/etc'];
+$Conf{RsyncShareName} = [
+  '/root',
+  '/etc',
+  '/var/www',
+  '/home',
+  '/var/lib'
+];
+
+$Conf{TarClientCmd} = '/usr/bin/env LC_ALL=C $tarPath -c -v -f - -C $shareName --totals';
+
+# remove extra shell escapes ($fileList+ etc.) that are
+# needed for remote backups but may break local ones
+$Conf{TarFullArgs} = '$fileList';
+$Conf{TarIncrArgs} = '--newer=$incrDate $fileList';
+$Conf{host} = 'web01.int.itguru.at';
+$Conf{ClientNameAlias} = '192.168.122.10';
+$Conf{RsyncClientCmd} = '$sshPath -l backuppc $host nice -n 19 sudo $rsyncPath $argList+';
+
+$Conf{PingMaxMsec} = 50;