#
# Default Bacula Storage Daemon Configuration file
#
#  For Bacula release 5.2.5 (26 January 2012) -- ubuntu 12.04
#
# You may need to change the name of your tape drive
#   on the "Archive Device" directive in the Device
#   resource.  If you change the Name and/or the 
#   "Media Type" in the Device resource, please ensure
#   that dird.conf has corresponding changes.
#

Storage {                             # definition of myself
  Name = lto-sd
  SDPort = 9103                  # Director's port      
  WorkingDirectory = "/var/lib/bacula"
  Pid Directory = "/var/run/bacula"
  Maximum Concurrent Jobs = 20
  #SDAddress = 192.168.5.2
  SDAddress = 10.0.21.4
}

#
# List Directors who are permitted to contact Storage daemon
#
Director {
  Name = lto-director
  Password = "YJZtoICDQycm3inl-RmiNpFEaT-M_yCpg"
}

#
# Restricted Director, used by tray-monitor to get the
#   status of the storage daemon
#
#Director {
#  Name = lto-mon
#  Password = "YJZtoICDQycm3inl-RmiNpFEaT-M_yCpg"
#  Monitor = yes
#}

#
# Note, for a list of additional Device templates please
#  see the directory <bacula-source>/examples/devices
# Or follow the following link:
#  http://bacula.svn.sourceforge.net/viewvc/bacula/trunk/bacula/examples/devices/
#

#
# Devices supported by this Storage daemon
# To connect, the Director's bacula-dir.conf must have the
#  same Name and MediaType. 
#

Device {
  Name = FileStorage
  Media Type = File
  Archive Device = /storage/bacula/backups/
  LabelMedia = yes;                   # lets Bacula label unlabeled media
  Random Access = Yes;
  AutomaticMount = yes;               # when device opened, read it
  RemovableMedia = no;
  AlwaysOpen = no;
}

#
# A Linux or Solaris LTO-4 tape drive
#
Device {
  Name = TapeStorage
  Media Type = LTO5
  Archive Device = /dev/nst0	# no auto reqind after writing
  #Archive Device = /dev/st0	# auto revind after finished writing
  LabelMedia = yes;                   # lets Bacula label unlabeled media
  AutomaticMount = yes;         # when device opened, read it
  AlwaysOpen = yes;
  RemovableMedia = yes;
  RandomAccess = no;
  Maximum File Size = 100GB
# Changer Command = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d"
#  Changer Command = "/bin/mt -f /dev/st0 offline"
#  Changer Device = /dev/sg0
# AutoChanger = yes
  # Enable the Alert command only if you have the mtx package loaded
# Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
# If you have smartctl, enable this, it has more info than tapeinfo 
  Alert Command = "sh -c 'smartctl -H -l error %c'"  
}




# 
# Send all messages to the Director, 
# mount messages also are sent to the email address
#
Messages {
  Name = Standard
  director = lto-dir = all
}